MARX-80T-W Knuckle Type High Speed Precision Press
Balanced Force Mechanism
Incorporates a balance mechanism that ensures even distribution of force on all sides. The eight-sided needle bearing guide further enhances the slider’s capacity to handle eccentric loads.
Advanced Non-Backlash Clutch Brake
Features a long-lasting, low-noise non-backlash clutch brake, enabling quieter press operations. The bolster size is 1100mm for the 60-ton model and 1500mm for the 80-ton model, making them the widest in their respective tonnage range.
Supplier Origin
China – Verified Manufacturer
Coordination
Singapore-Based · UEN 202519429N
Reference products from established manufacturers. YUXINGCORP coordinates sourcing; it is not the manufacturer.
Main Technical Parameters:
| Model | MARX-80T | MARX-80W |
|---|---|---|
| Capacity | 800 KN | 800 KN |
| Stroke length | 20, 25, 32, 40 MM | 20, 25, 32, 40 MM |
| Maximum SPM | 600, 550, 500, 450 SPM | 500, 450, 400, 30 SPM |
| Minimum SPM | 120 SPM | 120, 120, 120, 100 SPM |
| Die height | 240-320 MM | 240-320 MM |
| Die height adjustment | 80 MM | 80 MM |
| Slider area | 1080x580 MM | 1380x580 MM |
| Bolster area | 1200x800 MM | 1500x800 MM |
| Bed opening | 900x160 MM | 1200x160 MM |
| Bolster opening | 1050x120 MM | 1160x120 MM |
| Main motor | 30x4P KW | 30x4P KW |
| Accuracy | JIS/JIS Special grade | JIS/JIS Special grade |
| Upper Die Weight | MAX 500 KG | MAX 500 KG |
| Total Weight | 19 TON | 22 TON |
Main Features:
Knuckle-Type Press Design
This press maximizes the advantages of its knuckle mechanism, offering high rigidity, precision, and effective heat management.Complete Counterbalance System
Fitted with a comprehensive counterbalance system, it minimizes die height shifts caused by changes in stamping speed, reducing the bottom dead point variation between the first and second stampings.Balanced Force Distribution
Utilizes a balanced force mechanism with an eight-sided needle bearing guide, enhancing the slider’s ability to handle eccentric loads efficiently.Long-Lasting, Quiet Clutch Brake
Equipped with a durable, low-noise, non-backlash clutch brake, providing quieter press operations. The bolster dimensions are 1100mm for the 60-ton model and 1500mm for the 80-ton model, making them the widest bolsters in their respective tonnage categories.Servo-Controlled Die Height Adjustment
Featuring servo-controlled die height adjustment with memory functions, it significantly reduces mold change time and boosts production efficiency.
Press Products:
Common Causes of Injury in Punch Press Operations:
Operator Fatigue and Mistakes: Mental exhaustion, lack of attention, or errors made by the operator.
Complicated Die Design: Unreasonable die structure leading to complex operations, causing the operator’s arm to remain in the die area for an extended period.
Premature Activation: The press slider activates while the operator’s arm is still within the die area of the 60-Ton Knuckle-Type High-Speed Stamping Press.
Improper Coordination with Foot Pedals: When multiple operators are involved, using a foot pedal to control the press can lead to uncoordinated hand and foot movements, increasing the risk of accidents.
Lack of Supervision: In multi-operator settings, one person may control the slider’s movement while failing to properly monitor the actions of other operators.
Accidental Machine Start: When adjusting the die, if the machine motor remains running, unexpected starts can occur, leading to accidents.
Mechanical or Electrical Failure: Malfunctions within the 60-Ton Knuckle-Type High-Speed Stamping Press can result in uncontrollable slider movements.
Key Management Failures Leading to Punch Press Injuries
Untrained Operators: Workers operating the 60-Ton Knuckle-Type High-Speed Stamping Press without proper training or certification.
Non-compliance with Safety Procedures: Performing tasks without following proper operational guidelines.
Lack of Safety Devices: The press is operated without essential safety mechanisms in place.
Equipment Neglect: The press is in poor repair and not properly maintained.
Unused Safety Devices: Safety mechanisms are present but not activated during operation.
Spec sheet
MARX-80T-W Knuckle Type High Speed Precision Press
PDF · Specification for reference
How We Work - Our Commitments
Each commitment carries a condition and a remedy. A promise without conditions is marketing.
- Sourcing & Supplier Matching
Commitment:
A written sourcing report within 48 hours of a complete requirement brief.
Conditions:
Requires machine type or output target, destination country, and timeline. Custom or multi-line projects may take longer – we tell you upfront.
Remedy:
If we cannot meet it, you receive an interim response with a firm date –
not silence.
- Pre-Shipment Inspection
Commitment:
Third-party pre-shipment inspection – SGS or BV – before balance payment is released.
Conditions:
Included as standard on production-line projects. Available on request for single machines. Scope agreed in writing before booking.
Remedy:
If inspection fails against the agreed specification, shipment does not release until corrected or you approve a deviation in writing.
- Export Documentation
Commitment:
Complete export document pack – commercial invoice, packing list, certificate of origin, and destination-specific conformity documents.
Conditions:
Destination conformity regimes (CE, EAC, SABER/SASO, PVOC, SONCAP) vary and change. We confirm the applicable route per project before contract.
Remedy:
If a document we are responsible for causes a customs hold, we resolve it and carry the correction cost.
- Warranty & After-Sales
Commitment:
12-month equipment warranty with a named responsible contact and a written spare-parts dispatch commitment.
Conditions:
Covers manufacturing defects under normal operation and specified maintenance. Wear parts and consumables excluded.
Remedy:
Dispatch window and remedy – details to be confirmed. Contact us for project-specific warranty terms.
Need configuration advice, landed cost estimate or a project-specific sourcing report? Submit your requirements.
What we handle
Equipment sourcing & supplier coordination
Pre-shipment inspection – SGS or BV – before balance payment
Export documentation – invoice, packing list, certificate of origin
Customs clearance & destination conformity support
Shipping & freight logistics coordination
Installation guidance & commissioning support
